alpine 8048 programming

Home / the12volt's Install Bay / Car Security and Convenience / alpine 8048 programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bakgwailo

Member - Posts: 1

Joined: April 09, 2008

Location: Massachusetts, United States

Posted: April 20, 2008 at 6:31 PM / IP Logged

Hey, I found this alarm in a parts car I bought, and decided to install it in my car. After I got a new remote from Alpine, I switched the alarm over to my car, and it appears to be working perfectly.

HOWEVER, I can not for the life of me figure out the programming sequence for my new remote.... so while the alarm works, it does not talk with the remote. Any ideas, or does anyone have a user manual/install manual ?

I have tried the SEC100/150, and SEC-8028 programing procedure but they don't work.... thanks in advance !

Joe

quietwind

Member - Posts: 20

Joined: April 05, 2008

Location: Manitoba, Canada

Posted: April 21, 2008 at 10:47 AM / IP Logged

Hey Joe I have Alpine 8040 and just looked at mine to refresh my memmory but I think the answer your looking for is probably within the remote. Programming features for the security system are internal on my unit and as for the remote the dips are within the remote. Maybe that might work in your case that you simply match the dip position in your old remote. I had a paper on programming instructions but I can't remember which vehicle it in or I would have to look through a heap of saved reference material on one computer. Just a thought hope that helps!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine 8048 programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.