Passloc bypass question

Home / the12volt's Install Bay / Car Security and Convenience / Passloc bypass question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

RaveChild

Copper - Posts: 54

Joined: March 05, 2003

Location: Canada

Posted: March 15, 2003 at 1:36 PM / IP Logged

I am taking out a command start 2400/2500 remote starter and putting in an autopage rs750. There are 3 relays wired together is this what is bypassing my theft lock and if so how do i wire in my autopage to use the same bypass???

It is in a 1996 Sunfire GT

Thanks in advanced.

phredman

Member - Posts: 24

Joined: March 11, 2003

Location: United States

Posted: March 15, 2003 at 6:10 PM / IP Logged

was this model already installed?i would say 1relay is for the passlock,other2 for extra ign. maybe one for the trunk release?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 16, 2003 at 3:56 PM / IP Logged

One of the relays is for the bypass of the Passlock I system and the other two are for the door locks.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Passloc bypass question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.