the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

01 cavalier, remote start/keyless


Post ReplyPost New Topic
< Prev Topic Next Topic >
dksob81 
Member - Posts: 31
Member spacespace
Joined: February 17, 2007
Location: United States
Posted: December 06, 2008 at 7:30 PM / IP Logged  
I am installing a Remote Start/keyless entry on a buddy car. I got around the PASSLOCK II security system but I cannot figure out how to wire the keyless entry part. From what I have read this system is TYPE A (factory Keyless entry) which is positively triggered, so i connected the positive unlock/lock wires from the system to the White wire and Lt. blue wire in the driver kick panel and when I try to remote lock or unlock nothing happens. Do I have this connected right?

Joe

xplorin16 
Copper - Posts: 52
Copper spacespace
Joined: November 08, 2008
Location: Georgia, United States
Posted: December 06, 2008 at 10:53 PM / IP Logged  
What kind of rs/keyless.  The positive output may not be strong enough to power the locl/unlock.  You may need to use relays to increase the current going to the lock/unlock wire.
Advanced MECP
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: December 07, 2008 at 12:25 AM / IP Logged  
Equally as important, did you meter the wires? There are multiple blue and white wires in the DKP, most of which have nothing to do with door locks.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer