the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2 Questions


Post ReplyPost New Topic
< Prev Topic Next Topic >
acq810z 
Member - Posts: 32
Member spacespace
Joined: February 28, 2003
Location: United States
Posted: March 16, 2003 at 6:06 PM / IP Logged  

1.  I am planning on buying a Rockford Power 750X 4 channel amp.  Is there going to be any problem running the front channel at 2 ohm and the back at 4 ohm?

2. Totally unrelated;  I have a trunk rattle.  It is actually the lid bouncing up and down not any thing else because I have Brownbread on everything.  It just seems that the spoiler that is on there is a little to heavy and makes the trunk lid bounce when going over bumps.  Like I said, EVERYTHING has at least one layer of brownbread over it.....how do I stop the trunk from bouncing.  It is a 97 Civic EX coupe. 

Thanks in advance

~Q

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: March 16, 2003 at 6:16 PM / IP Logged  

1)  you can run the channel 1,2 @ 2 ohm and 3,4 @ 4ohm there is nothing wrong with that.

2) There are black feet on the trunk lid have you tryed to adjust them yet?

acq810z 
Member - Posts: 32
Member spacespace
Joined: February 28, 2003
Location: United States
Posted: March 16, 2003 at 6:27 PM / IP Logged  

Yeah I have tried they just twist.  they dont screw out or in so there is no height adjustment for them.  it sucks

thanks for the quick post!

~ Q

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: March 16, 2003 at 6:36 PM / IP Logged  
Well they should go both in and out sounds like they might be broken for some reason. Also the black weather striping around the trunk opening what kind of condition is that in?
acq810z 
Member - Posts: 32
Member spacespace
Joined: February 28, 2003
Location: United States
Posted: March 16, 2003 at 9:22 PM / IP Logged  

The weather strip is in good condition.  I dont know what to say.  I will probably have to jerry rig something to make everything tighter back there.  Thanks. 

If you have any other sugestions I am open to them as well.

Thanks Again

~Q

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: March 17, 2003 at 6:56 PM / IP Logged  

You could consult a body shop they might be able to help you out. Also check the trunk latch and make sure it’s not loose or broken.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer