compustar cm5200 wiring needed

Home / the12volt's Install Bay / Car Security and Convenience / compustar cm5200 wiring needed (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tbird2340

Copper - Posts: 363

Joined: October 03, 2003

Location: Ohio, United States

Posted: January 16, 2009 at 1:46 PM / IP Logged

Let me preface by saying I've done over 30 remote starter installs but they've all been using Crimestopper units.. I've moved over to Compustar because Crimestopper officially sucks and I'm looking over the manual.. Needless to say I'm utterly confused..

Do I need to purchase an OP500 to program something as simple as a 2nd starter / ign / accessory wire? In the manual it shows a "Special Option Group" for the "POC" wires on CN3.. Well, the 2nd starter, 2nd accessory, and 2nd ignition wires are all "POC" wires..

Someone, please let me know.

Thanks!

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 16, 2009 at 10:10 PM / IP Logged

All the wires listed as POC wires can be changed to any one of 19 different functions but as a default, these wires will perform their respective functions. YOu will need the OP500 in order to change the POC wires, but it only depends if you need to. I've installed 1000's of Compustar units and have only had to use the OP500 to change POC wires a handfull of times.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

realsnake

Member - Posts: 18

Joined: December 07, 2007

Location: British Columbia, Canada

Posted: January 16, 2009 at 10:26 PM / IP Logged

http://www.compustar.com/main.htm

dealer section install manuals

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar cm5200 wiring needed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.