dei python 571xp, ’08 jeep compass

Home / the12volt's Install Bay / Car Security and Convenience / dei python 571xp, ’08 jeep compass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rdlsz24

Member - Posts: 4

Joined: February 04, 2009

Location: Illinois, United States

Posted: February 04, 2009 at 12:47 PM / IP Logged

I have a DEI Python 571XP installed on my wife's '08 Jeep Compass. All is well except when the doors auto lock (doesn't matter if started with remote or with key), the horn honks. It didn't do this before the install, and it's not set to do it in the car's computer as far as I can tell. I had it installed at American (Midwest retail store), and the guy that installed doesn't really have any ideas left on how to make it stop doing this. I have the manual, etc, and cosider myself competant with electronic settings, etc, so if anybody has an idea on how to turn this annoying feature off I am willing to try it.

P.S. My brother said his gf's new Chrysler Sebring does the same thing with a starter installed at the dealer.

Rob

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: February 04, 2009 at 1:03 PM / IP Logged

program ignition controlled door locks off, I am assumming he use a module to bypass and integrate door locks. so when the door lock signal is send it honks the horn.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

rdlsz24

Member - Posts: 4

Joined: February 04, 2009

Location: Illinois, United States

Posted: February 04, 2009 at 9:24 PM / IP Logged

Are you saying I should make it so the doors don't auto lock?

Rob

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: February 05, 2009 at 2:23 PM / IP Logged

yes but on the python unit , not the car.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

rdlsz24

Member - Posts: 4

Joined: February 04, 2009

Location: Illinois, United States

Posted: February 05, 2009 at 2:32 PM / IP Logged

Ok I can try that. It should tell in the manual how to do that correct?

Rob

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: February 05, 2009 at 2:33 PM / IP Logged

yes, but on the install manual

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei python 571xp, ’08 jeep compass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.