memphis belle/alpine

Home / the12volt's Install Bay / Car Audio / memphis belle/alpine (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: February 04, 2009 at 8:44 PM / IP Logged

yes you can wire for a one ohm load off a single dvc sub if it is a dual 2 ohm

memphis belle/alpine - Page 2 -- posted image.

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: February 04, 2009 at 8:49 PM / IP Logged

...or quad 4 ohm... memphis belle/alpine - Page 2 -- posted image.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

needham

Member - Posts: 5

Joined: February 04, 2009

Location: Arkansas, United States

Posted: February 04, 2009 at 9:05 PM / IP Logged

j.reed wrote:

yes you can wire for a one ohm load off a single dvc sub if it is a dual 2 ohm

thanks man...........where in AR are you, I am in Marion!

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: February 04, 2009 at 11:14 PM / IP Logged

Beebe. There is a guy from Conway , Jeff. that is doing some comps on TL in AR..........ARSPL.forumotion.net check him out if you feel the need to see what you can do on a meter or meet more guys from Ar the share intrest in audio. I know i will be at most of the comps this year. Maybe i will see ya around.

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: February 05, 2009 at 8:24 AM / IP Logged

j.reed wrote:

needham wrote:

I should explain better

1 pair of in front doors

1 pair of in rear doors

can I get 115w rms into EACH speaker with the 1300 Memphis Belle?

Yes you can but you would have to run say both right(front and rear) on one channel stereo and the lefts on one channel stereo to get a 2 ohm load to get you 115 rms in stereo operation. Then using the sub channel for the sub. As i said before using 3 of the 5 channels. Keep in mind this will lose your ability to fade front and rear

You will get 115rms from each channel but it will divide the power between the 2 speakers only giving you 57.5 watts per speaker. Leave it in normal 4 channel operation at 4 ohm for the doors. even if you were to put a full 115watts to each speaker your only looking at a 3db increase.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

memphis belle/alpine

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.