2003 dodge durango radio removal

Home / the12volt's Install Bay / Car Audio / 2003 dodge durango radio removal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

redstealthrt

Member - Posts: 37

Joined: October 15, 2008

Location: Tennessee, United States

Posted: February 09, 2009 at 4:43 AM / IP Logged

Could anyone post how to remove the stock radio from a 2003 Dodge durango?

Thanks! :)

David

Back to Top

soundnsecurity

Gold - Posts: 2,711

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 10, 2008

Location: Louisiana, United States

Posted: February 09, 2009 at 10:04 AM / IP Logged

go to www.metraonline.com and look up the dash kit for your truck. somewhere on there it will have some instructions on how to take that radio out. chances are you just need to find a few screws and the trim will be held on with clips behind the trim. you will either need a phillips head screwdriver or a 10mm nut driver to take the radio out once your have the trim off

Back to Top

Search for other posts by soundnsecurity

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 dodge durango radio removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.