05 dodge magnum/1400xp

I recently purchased a python 1400xp for my 2005 dodge magnum.  After wiring the system I engaged the remote start and the system started the car 3 times unsucessfully.  I then came back to the forums and found that i needed to cut and hook up the 2nd start wire/accessory wire to a set of relays, using the 1084 diagram.  I dont understand the diagram when one lead is hookes up to the prpl ignition wire on the alarm module.  The orange wire is easy enough and when i hook it up i get the accessories in the car working.  But what wire do i use on the alarm module.  Any help would great.

go to www.bypasskit.com enter your vehicle you should come up with a pkucg2x that will do your PURPLE / brown wire which controls your negative start and accessory. What did you use to bypass the chrysler immobilizer?

So if I use a BYPASSKIT i wont need to work with the second accessory/start wire at all?

there is one wire coming off the bypass to control PURPLE / brown mux wire. You just won't have to use relays for the negative start and accessory