trunk solenoid

Home / the12volt's Install Bay / Car Security and Convenience / trunk solenoid (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shakermaker

Member - Posts: 13

Joined: March 02, 2009

Location: California, United States

Posted: March 08, 2009 at 10:10 AM / IP Logged

Is this diagram wired correctly if i was to follow it? Ive had a look at a few other posts on here for wiring and it contradicts it :S

http://www.bulldogsecurity.com/pdf/TRUNK%20POP%20ACTUATOR%20DIA.gif

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: March 08, 2009 at 12:45 PM / IP Logged

the diagram is wrong, the relay is wired correctly except for the green wire from the solenoid goes to pin 87 on the relay only and not straight to 12volts and pin 87 like the diagram describes.

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: March 08, 2009 at 4:03 PM / IP Logged

The diagram is correct.

The green wire from the solenoid is not going straight to 12V, it's going to a normally open switch. When you depress the switch, it pops the trunk.

If you already have a stock "pull lever" to pop the trunk, you don't have to add the switch listed.

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 08, 2009 at 4:28 PM / IP Logged

In continuing this thread, it would be wise to post your situation and Year/Make/Model of vehicle/components. You may already have a factory solenoid and the thread is moving in the wrong direction.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Back to Top

shakermaker

Member - Posts: 13

Joined: March 02, 2009

Location: California, United States

Posted: March 09, 2009 at 5:18 PM / IP Logged

Thanks everyone, sorry for not posting my vehicle make. I wired it up yesterday according to the diagram and works great with my alarm remote and with the new push button :)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk solenoid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.