rubber , ground?

Home / the12volt's Install Bay / Car Audio / rubber , ground? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rfhvhtoo

Copper - Posts: 238

Joined: June 13, 2008

Location: Florida, United States

Posted: March 29, 2009 at 8:43 PM / IP Logged

Hey I drive a ford truck and theres not many grounding areas. Some of my amps have malfunctioned so Im gonna change some things including my ground. theres a 3/4 inch screw that I think Goes all the way through to the frame and its surrounded by metal. But under the truck there is a rubber clump on the screw. Will this hurt the ground?

I can't hear you!

Back to Top

calijtee1

Copper - Posts: 121

Joined: August 29, 2008

Location: California, United States

Posted: April 03, 2009 at 8:42 AM / IP Logged

what year ford?, did you use a brush to remove the paint. where you grounded it before. ford is still made really well,.i have had this problem before too. i just used any part of the floor. just use a brush to remove the paint away because ford puts on quite a few coats .

installers do it best. we got the magic hands!

Back to Top

soundnsecurity

Gold - Posts: 2,711

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 10, 2008

Location: Louisiana, United States

Posted: April 03, 2009 at 8:51 AM / IP Logged

what truck exactly and where is the amp going?

Back to Top

Search for other posts by soundnsecurity

rfhvhtoo

Copper - Posts: 238

Joined: June 13, 2008

Location: Florida, United States

Posted: April 03, 2009 at 9:48 AM / IP Logged

its going in a Ford F150 2006 Extended cab behind the the back seat.

I can't hear you!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rubber , ground?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.