1 xover to 2 sets of components

Home / the12volt's Install Bay / Car Audio / 1 xover to 2 sets of components (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hamzter

Copper - Posts: 116

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 15, 2005

Location: United States

Posted: April 05, 2009 at 7:26 PM / IP Logged

Hi all,

Haven't been here in a while as I have been unemployed since last year and with the new kid, times was tight... but hopefully I can get employed very soon.

Well, I decided to try and hook up the equipment again in the Infiniti G20. I unplugged it from power because I thought that there might be a short in the Eclipse HU, but I'll try again and if it don't work I'll chuck it.

Anyway, I decided to remove the electronic Xover and just run passive Xovers with my MTX 4 channel amp. Here is what I have 2 sets of Polk DB6700 components and 3 crossovers. I was wondering for the rear set, could I just hook up the one crossover to channel 3/4 on the amp and then share the w/t out to the rear deck components? If not, I will have to get a matching set of crossovers for these speakers.

I hope this is not a stupid question, but I had to ask.

thanks,

Mark

Mark "Hamzter" Cinense

1991 Infiniti G20 w/JDM SR20DE

Eclipse CD8445

MTX Thunder 684

Polk DB6750

Polk DB6500

Optima Red Top in the Trunk

Back to Top

hamzter

Copper - Posts: 116

Joined: March 15, 2005

Location: United States

Posted: April 06, 2009 at 10:45 AM / IP Logged

nevermind the previous question.

Now for a more challenging question. How can I determine what the DB6500 passive crossover is set at?

Mark "Hamzter" Cinense

1991 Infiniti G20 w/JDM SR20DE

Eclipse CD8445

MTX Thunder 684

Polk DB6750

Polk DB6500

Optima Red Top in the Trunk

Back to Top

DYohn

Moderator - Posts: 10,741

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 06, 2009 at 12:06 PM / IP Logged

3.2KHz according to this review: http://www.polkaudio.com/downloads/sr6500_eprint.pdf

Support the12volt.com

Back to Top

haemphyst

Platinum - Posts: 5,054

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: April 06, 2009 at 4:00 PM / IP Logged

MARK!!! I've been wonderin what happened to you! Sorry to hear about the job, man... You and I are in the same boat! You have PM.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1 xover to 2 sets of components

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.