removing factory alarm on 94 lexus gs300

Home / the12volt's Install Bay / Car Security and Convenience / removing factory alarm on 94 lexus gs300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flatlineboi55

Member - Posts: 12

Joined: May 18, 2008

Posted: April 26, 2009 at 9:15 PM / IP Logged

Hi I recently installed a Viper 5901 into a 1994 lexus gs300 and can not figure out how to disconnect the factory alarm..

when i remote start the car the horn sounds and when i open the doors/hood/trunk the horn will sound...

im kinda stuck on what to do

any info would be greatly appreciated

thanks

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: April 26, 2009 at 9:24 PM / IP Logged

You just need to disarm the factory alarm before remote start it is done through a RED / black wire that will show ground when turning the key in the door to unlock. Just hook up the factory alarm disarm wire from the viper to this wire and it should take care of the problem

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

removing factory alarm on 94 lexus gs300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.