zx1000.1, 2 dvc s10l7 subs at 2 ohm’s?

Home / the12volt's Install Bay / Car Audio / zx1000.1, 2 dvc s10l7 subs at 2 ohm’s? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

onsatmex5

Copper - Posts: 52

Joined: June 06, 2004

Location: United States

Posted: July 12, 2009 at 3:49 PM / IP Logged

I have 2 Kicker S10L7 subs they have the Dual 4 ohm voice coil's, I also have a 2007 KICKER ZX1000.1 Amp. The amp Is 2 ohm stable, How can I wire the subs so everything is running at 2 ohm's, I have looked at the wiring diagrams on kickers site, but it is confusing to me!

Thanks for any help : )

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 12, 2009 at 4:17 PM / IP Logged

The only safe way to connect those speakers to that amp are as follows.

Option 2 (series/parallel) = 4 ohm load

Voice coils wired in series, speakers wired in parallel

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

zx1000.1, 2 dvc s10l7 subs at 2 ohm’s? -- posted image.

The only way to achieve a 2 Ohm load with 2 speakers would be Single 4 Ohm voice coils or Dual 2 Ohm coils.

thatfloorguy

Copper - Posts: 95

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 14, 2009

Location: Ohio, United States

Posted: July 12, 2009 at 9:50 PM / IP Logged

A 2ohm load with that amp,if it is getting adequate power will toast (2) L7 10's.

thatfloorguy

Copper - Posts: 95

Joined: May 14, 2009

Location: Ohio, United States

Posted: July 12, 2009 at 10:08 PM / IP Logged

I would give them 2ft^3 each wired to 4 ohms and enjoy zx1000.1, 2 dvc s10l7 subs at 2 ohm’s? -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

zx1000.1, 2 dvc s10l7 subs at 2 ohm’s?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.