2004 camry, python 1400xp, omega pkt2

I need  help to install Python 1400xp r/s with Omega IM05 PKT2 in camry 2004 GLi 4cyl  2.4L  2AZ-FE.

1-there is no thin BLACK / YELLOW wire as a second starter in the ignition harness. Its a thin BLACK/ Orange , Its give 12v+ with cranck. I connected by relay 5wi with Purple wire ( starter relay trigger) in remote start.

2- I can't found 2 wires In ICM to connect with Omega module wires :

Violet data IMI output wire, Violet/White data IMI input wire, & Orange data IMO wire.

What is the meaning of : IMI , IMO.

thanks

These is all wires in camry ICM module :  

Plug E6 :======Pin No.     Color:--------     -------1             Black / Red (thick)3             Black / Yellow (thick)5             Black / Orange6             Li Blue7             White / Li Blue8             Black / White9             Black / Orange ..................................Tach wire10           Green / Red 11           Green / Red12           Black / Yellow 14           Brown17           White 18           Red 19           Pink / Black

Plug E7 :

======Pin No.     Color:--------     -------2             Blue / Yellow 7             Pink / Blue8             Yellow9             Blue / White 10           White / Blue 11           Red / Black 14           Yellow / Green 15           Green / White 16           Violet...........................................security light17           Violet / White 19           Green / White 21           Blue / Yellow 27           Red / Blue 29           Green / Orange 31           Blue / White 32           Yellow / Black 33           Li blue34           Li blue

Plug E9 :

======Pin No.     Color:--------     -------1             White  (thick)2             Black   (thick)4             Li blue (thick)7             Brown (thick)8             Black / Orange 9             Black / Yellow 14           Yellow 15           Li blue / Black 16           Li blue / Red 17           Li blue / Yellow 18           Pink 19           Red / Black 23           Black 24           Red 25           White / Blue 26           Red 27           Black29           Red / White  34           Li green35           White 

Plug E10 :

======Pin No.     Color:--------     -------1             Li blue (thick)2             Red  (thick)3             Yellow  (thick)4             White  (thick)5             White  6             White / Black 7             White / Black8             Red / White 9             Pink 10           Green / Black11           Li blue / Yellow 12           Black / Red  13           Blue14           Yellow 15           Black / White 16           Yellow / Black17           Yellow / Red 18           Yellow ( Pige )19           Green 20           Blue / Black21           Li green23           White / Red  26           Yellow 27           Red  28           Brown 30           Green 34           Green

Its ECM module ,not ICM. Sorry

Second starter wire:   If you want, just unfasten the plastic cover around the ignition switch........follow that BLACK/ orange or BLACK / YELLOW you found, all the way up to the igntion switch plug. If the wire you found is plugged right into the ignition switch, it must be the right one. Immobilizer wires: Most U.S. Camrys of that vintage didn't get the immobilizer. (Only the SE V6, LE V6, and all XLE models.) Not sure about what would be in Saudi Arabia. Does this Camry have a flashing red light in the dashboard that says SECURITY?