09 corolla remote start, no crank

Just wondering if you did any work on the trunk release and the rear window defrost with your Viper 5701?

I have a 2009 Corolla with a Viper 5301 and they are similar in wiring and have been trying to get these items connected to my 5301.  The relay wiring is a bit confusing to me and don't want to something wrong..

Thanks  

Rich

rear window defrost in the corolla doesn't need a relay, just use one of your (-) aux outputs and set it to 8 mins

as for the trunk release you need a relay setup for reverse polarity

Hi 05gt,

I plan on connecting the Blue/White 2nd Stauts Output from the Remote Start Input, 5-Pin connector for the rear window defroster. Where do I connect this Blue/White wire to in the defrost circuit??  After or before the rear window defrost switch?? Does this feed to a relay that feeds to the rear window defrost grid??

Thanks

Rich