Parking light chime.....grrr!

Hey guys, I've got a 1988 Beretta and a 1993 Cutlass Supreme both with the Crimestopper 2001 Alarm w/ Keyless entry. Here's the deal. I have the parking light flash wired into the parking light wire at the headlight switch. Whenever disarm (or arm, for that matter) my parking light chime goes off. It's not a big deal when I arm it but when I disarm the lights flash twice then stay on steady until the car is either started, or the alarm is armed again. Which, as you can imagine, that damn chime is annoying! So, I know why it's going off but can't figure out how to isolate the parking light flash wire from my alarm module to just the lights, and not the chime, but... if I leave my lights on, I still want the chime to go off (not like I've ever done that before) :) If anyone can shed some light on the subject that would be great. Now I'm going to go stare at the wiring diagram from my chilton some more. :) Thanks in advance for any help. Tom.

well im not sure about this but you can try a diode just after dinger where the parking light wire comes out. once you find that spot, hook your alarm wire up after the diode. so that the it gose like this........... dinger...wire...diode..wire...alarm wire. if i losy you, send me a PM and i will try explain it betterGood Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt