what bitwriter version for 50.7x?

Home / the12volt's Install Bay / Car Security and Convenience / what bitwriter version for 50.7x? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

johnc123

Member - Posts: 3

Joined: November 14, 2009

Posted: November 29, 2009 at 8:07 PM / IP Logged

Just finished a Clifford 50.7X install in my 2004 Tundra Doublecab. Everything works, but it's very tedious to try to program all of the features using the valet switch and chirps. I wouldn't mind picking up a used unit off Ebay if I was sure the chip version would work with the 50.7X. Does anyone know what version I need? Thanks.

PS - the information I found on this website was a big help, as this was my first alarm/keyless entry/remote start install.

Back to Top

calitech247

Copper - Posts: 68

Joined: November 02, 2009

Location: California, United States

Posted: November 29, 2009 at 8:52 PM / IP Logged

Here's some useful info in the 50.7X installation manual. I just copy and paste here for ya...

Bitwriters require software v2.6. Bitwriters with a date code of 6a or older

require an IC upgrade (p/n 998M). Some Bitwriters with a date code of 6B

do not require the IC upgrade, refer to tech tip # 1112 for more information.

Bitwriter 2 compatible.

Back to Top

johnc123

Member - Posts: 3

Joined: November 14, 2009

Posted: November 30, 2009 at 7:03 AM / IP Logged

Thanks for the reply. I looked all through my manuals again, and found the information you posted inside the front cover of the installation guide. Now I'll try to find tech tip #1112 and see what it says.

Back to Top

calitech247

Copper - Posts: 68

Joined: November 02, 2009

Location: California, United States

Posted: November 30, 2009 at 1:01 PM / IP Logged

Ok...glad to help. I'll try to see if I can get the tech tip and send it via email. email address?

Back to Top

johnc123

Member - Posts: 3

Joined: November 14, 2009

Posted: November 30, 2009 at 2:32 PM / IP Logged

I was able to locate a copy of the tech tip, it deals with figuring out which version you have and how to upgrade it. Thanks again for the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what bitwriter version for 50.7x?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.