abs, brake light, 2003 dodge ram

working on a 2003 dodge ram every thing working fine but then the battery

went died, i charged  the battery now the brake and abs light come on with

the factory key. check the fuse under the hood ok is there some where else i can check

need help thanks

ok that fine but what i'm trying to say is that with the factory key in the ignition

to start the car the abs & brake light come on. also to the battery went died

after that, that's  when the lights came on

found the problem it the truck when the battery dies the two lights come on

and stay on until you drive it. but always check your work and then recheck again.

thanks for the help

Did you use reloys to isolate the 3 ignition and 3 accessory wires?  Do you have a green wire as mentioned in the note?  They show no wire color for Ign 2, I can only assume that it may be green. 

If you did not use relays to isolate the 3 wires, try removing the remote start from the equation to see if the vehicle behaves normally with the key.  If it does, you will have to either diode isolate (with some high current capacity diodes) or use relays.  Are the green and orange wires unpowered during start?