single cab blow through

Home / the12volt's Install Bay / Car Audio / single cab blow through (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

i am an idiot

Platinum - Posts: 13,672

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 14, 2009 at 6:13 AM / IP Logged

I did not take the time to read to see if you got your answer yet, if not, you need to go to a camper supply store and look into an "Accordian style camper boot seal" You can use the search function here, I have mentioned it here once or twice.

When cutting the holes, you need to cut the hole in the bed 2 inches larger in the bed than in the cab of the truck. 10 x 22 in cab = 12 x 24 in the bed of the truck. This is NECESSARY to accomodate frame flex, the bed needs to be able to flex independent of the cab. Mount the box to the cab and have only a support in the middle of the bed.

singlecabslamin

Member - Posts: 25

Joined: December 08, 2009

Location: United States

Posted: December 14, 2009 at 2:53 PM / IP Logged

so j. reed did ya come up with anything for me yet?

First major build for myself in the process

Search for other posts by singlecabslamin

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: December 14, 2009 at 3:44 PM / IP Logged

Yeah I came up with.

37.25"W x 13"H x 10" D. 2.02cu.ft. GROSS Port 4" round x 14" long Fb 33Hz.

Gross volume 2.02cu.ft.

- port .10

- driver displacement .15

NET= 1.77cu.ft.

Or if you want to stick to the recommended enclosure and tune.

37"W x 13"H x 10"D. 2.0 cu.ft. GROSS port 4" x 12" Fb 36Hz

Gross volume 2.0cu.ft.

- port .08

- driver displacement .15

NET= 1.77cu.ft.

single cab blow through - Page 2 -- posted image.

singlecabslamin

Member - Posts: 25

Joined: December 08, 2009

Location: United States

Posted: December 15, 2009 at 12:43 AM / IP Logged

ok so that should make it louder right?and r those outside dimensions, and which way should u put the port, and for a round port use PVC pipe?

First major build for myself in the process

mrarff

Copper - Posts: 71

Joined: February 23, 2006

Location: South Carolina, United States

Posted: December 15, 2009 at 1:21 PM / IP Logged

I've definitly deciced that my second career will be as an audiologist. It'll be like takin candy from a baby.Make that MANY babys.

"That'll get ya 10 in Leavenworth,11 in Twelveworth, or 5 & 10 in Woolworth". Groucho Marx

singlecabslamin

Member - Posts: 25

Joined: December 08, 2009

Location: United States

Posted: December 15, 2009 at 2:29 PM / IP Logged

hmmm...since ive getting the advice for free, that would be a very unrewarding career.. single cab blow through - Page 2 -- posted image.

First major build for myself in the process

mrarff

Copper - Posts: 71

Joined: February 23, 2006

Location: South Carolina, United States

Posted: December 15, 2009 at 2:46 PM / IP Logged

Bubba, ya missed the whole point.

"That'll get ya 10 in Leavenworth,11 in Twelveworth, or 5 & 10 in Woolworth". Groucho Marx

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: December 15, 2009 at 3:02 PM / IP Logged

singlecabslamin wrote:

ok so that should make it louder right?and r those outside dimensions, and which way should u put the port, and for a round port use PVC pipe?

It should sound better for sure. Your box now has way to much port area and is too big.

Yes, those are outside dimensions with 3/4" material. You will have to port it out the top to be able to get you port length. Yes, you can use PVC. If you would rather i can figure it in a slot port.

singlecabslamin

Member - Posts: 25

Joined: December 08, 2009

Location: United States

Posted: December 16, 2009 at 12:53 AM / IP Logged

well what do u recomend lol since it will goin out the top will it sound better? and how do i put a 14" long port in a 13" tall box?

First major build for myself in the process

singlecabslamin

Member - Posts: 25

Joined: December 08, 2009

Location: United States

Posted: December 16, 2009 at 12:55 AM / IP Logged

oh yea and mrarff, i think i did miss the point lol single cab blow through - Page 2 -- posted image.

First major build for myself in the process

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.