2005 dodge caravan keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 2005 dodge caravan keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jaynen

Member - Posts: 2

Joined: January 05, 2010

Posted: January 08, 2010 at 7:11 PM / IP Logged

I went and installed keyless entry for my dads van and the lock and unlock works, but now when I start the van the wipers turn on and wont turn off unless I lock the van. I am supposed to use a 2000ohm resistor for unlock and a 5200ohm resistor for lock. I was unable to find a 5200ohm resistor and put in a 5100ohm resistor instead. Could this be a problem? The lady at the electronics store said should make no differance. Should I look else where?

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: January 08, 2010 at 10:20 PM / IP Logged

well that resistor i think is to far off and are you sure you are not hooking up the wipes because i have done that before but i intended to do it

this is how it needs to be hooked up just incase you have it wrong

2005 dodge caravan keyless entry -- posted image.

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: January 08, 2010 at 10:21 PM / IP Logged

just go to this link

http://64.85.6.129/extrainfo/diagrams/17044_CARAVAN_CHRYSLER%20MINI%20VAN%2001%20-%20UP%201%20WIRE%20JBS%20UNITS.pdf

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: January 08, 2010 at 10:43 PM / IP Logged

i dunno what others go by, but i go by + or - 5% tolerance. and using a 5100 is in that tolerance...ive never had a problem but there is a first for everything

91stt

Silver - Posts: 564

This member consistently provides reliable information

Joined: May 24, 2006

Location: New Jersey, United States

Posted: January 08, 2010 at 10:53 PM / IP Logged

make sure you have it wire for chassis ground and not relying on the transistor neg output

jaynen

Member - Posts: 2

Joined: January 05, 2010

Posted: January 09, 2010 at 7:43 AM / IP Logged

Ya I originally hooked up the lock unlock to the wrong wire, (the wipers wire). So maybe when I closed everything up something is getting grounded that shouldnt be. Thanks for the replies though guys, I am gonna go look at it now.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 dodge caravan keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.