Clifford specific turbo timer question.

Home / the12volt's Install Bay / Car Security and Convenience / Clifford specific turbo timer question. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Black Se7en

Member - Posts: 9

Joined: February 20, 2003

Location: United States

Posted: April 08, 2003 at 12:46 AM / IP Logged

I know Clifford alarms have a built in turbo timer option.

Does anyone know how I can set this up myself?

I know it has to do with an additional relay and Auxilary Timed Output C on most G4 systems.

I just don't know how to wire it up.

Can anyone provide me info on how to do this or at least point me in the right direction?

Thanks for your time!

Back to Top

netZ

Member - Posts: 27

Joined: June 16, 2002

Location: United States

Posted: April 08, 2003 at 9:21 AM / IP Logged

you would need at least 2 12 volt relays for this to work.

Gray/Red of the Clifford's Channel C Negative Output. Program it for Timed operation.

Connect it to both Pin 85 of the 12 volt relays. Connect Pin 86 & Pin 87 of both relays to a fused 12 volt source.

Pin 30 of the 1st relay needs to be tapped to the Car side of the Ignition wire. Pin 30 of the 2nd relay needs to be tapped to the Car side of the Accessory wire.

netZ

Black Se7en wrote:

<FONT class=nf face=Verdana color=#ffffff size=2>I know Clifford alarms have a built in turbo timer option.

Does anyone know how I can set this up myself?

I know it has to do with an additional relay and Auxilary Timed Output C on most G4 systems.

I just don't know how to wire it up.

Can anyone provide me info on how to do this or at least point me in the right direction?

Thanks for your time!

Back to Top

Black Se7en

Member - Posts: 9

Joined: February 20, 2003

Location: United States

Posted: April 08, 2003 at 1:56 PM / IP Logged

netZ - thanks for the reply.

I forgot one piece of imformation that might be important. I have the IntelliStart 4 installed on my car as well. Will this run into a problem with the relay setup you described? Could I possibly use the IntelliStart 4 as part of the setup? I just don't want the relay setup or the IS4 to interfere with each other.

Thanks again for your time! :)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford specific turbo timer question.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.