2005 BMW 325i And Viper 5901

Main Harness Red to white trunk trigger a relay to power the trunk release wire, which is grey/light green. I explained that to you ages ago. Don't wire the factory alarm and disarm wires, instead take lock and unlock to them, also extend lock via comfort close, that will enable window close on arming. Ignore the red yellow.

In all the wire diagrams I have gotten (directwire, the12volt, ext.) says that the trunk release trigger (AUX/Trunk Release) is grey/brown so im guessing that it is correct. What is this part about extending lock via comfort close. What do you mean by that? And why am I ignoring the RED / yellow wire which is the lock/unlock wire?

Wow this is crazy. I hope it turns out ok

Im sorry, but this statement is the best part "The reason I have been having all these questions is because I bought this from ebay and the installation directions were not included for some reason. All I have is the Quick Reference Install Guide and Owners manual."

X2 with mike!commit your way to jehovah and he will act in your behalf. psalms 37:5

Times 3 for me I just didn't want to comment on product ESPECIALLY electronic purchased from FleaBay. The trunk release is POS., needs a relay from the RED / white and on a 2005 I did all of three weeks ago it was grey with a very light, hard to see green stripe. Look at the programming on either owner's manual or install sheet it does mention comfort or total close, also going to the lock wires I suggested will work better, also I've done a German/Russian market car with factory alarm, it never came into the equation.

Oh and did I mention the diodes required on the trunk light feeds or the lock/unlock wires, belatedly now suggested also by DEI?

Just want to double check that I am buying the right diodes. http://www.newark.com/jsp/displayProduct.jsp?sku=18C8911&CMP=KNC-G10000683&HBX_OU=50&HBX_PK=1N4001 And would a local pep boys have these or home depot? Thanks