the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pxa h 100


Post ReplyPost New Topic
< Prev Topic Next Topic >
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: February 01, 2010 at 7:32 PM / IP Logged  
I did a quick search and through my own research I think I have an answer. This is just to confirm.
2002 Kia optima SE. CDA 9886 Receiver, Factory amp, Soon to be Alpine 6-1/2 components up front and 6x9s in the rear deck. no subs yet.
My question is I am looking for a parametric EQ and crossover for all three channels of the head unit front/rear/sub so I can properly cross over each of the speakers (I know the component set has its own passive crossover). I am pretty sure through reading, that the Imprint processor allows this along with MANY other options. The factory amp seems pretty stout so I will keep that so long as it drives the type R's ok. The subs will eventualy be 3 x 10 in Type R's in a sealed enclosure.
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: February 03, 2010 at 1:15 AM / IP Logged  
Bump pxa h 100 -- posted image.
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: February 03, 2010 at 1:26 AM / IP Logged  
Never mind it does pxa h 100 -- posted image. Next on my Goodie list

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer