This Is A Good Question About Sirens

Home / the12volt's Install Bay / Car Security and Convenience / This Is A Good Question About Sirens (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: April 10, 2003 at 1:06 PM / IP Logged

Hey I was trying to get everyones attention. Does anyone know how to change a multi tone siren to sound only one tone? Any help would be great

Cruisin Security And Sounds

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: April 10, 2003 at 1:16 PM / IP Logged

If its dei, you can open up the back and cut the loops - not the big one hanging out but some small ones in side. Each loop conrtolls a tone so cut as many tones as you want off.

sufferrar

Copper - Posts: 190

Joined: July 17, 2002

Location: Trinidad and Tobago

Posted: April 10, 2003 at 1:18 PM / IP Logged

You have to open it up and look for about 6 traces coming off an i.c. on the circuit board.Cutting each trace will remove each sound.try one at a time.

"I'm So Loud It Hertz"

ksachet

Member - Posts: 13

Joined: April 08, 2003

Location: United States

Posted: April 10, 2003 at 4:10 PM / IP Logged

I have done this on my DEI alarm and it works great for removing those stupid tones that you don't want. Be careful not to cut the long loop that hangs out. if this is cut it kills the quiet arm and disarm tone and will now arm and disarm at full blair. If this is what you want. then cut this loop.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

This Is A Good Question About Sirens

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.