domelight and reverse lights h1/4

give it a shot. if it does work no worries. if not then you'll need a relay.

as far as the starter kill, i'd imagine from the diagram that the relay socket has it configured already so 3 connections will cover it. for it to work correctly with 3 wires the red wire would have to be connected to pins 86 and 87a in the socket itself

UPDATE:

One good thing, and a big bad thing has happened. Good thing is I have everything wired in the way I think its supposed to be, and the doors lock and unlock with the factory keyfobs like it should. Also the horn works just like it should..

Now for the bad thing. There is a draw on my battery that keeps killing it about a day later. I charge it, then next day boom dead.. What can be causing this. We have metered it to be a 3-amp draw on the battery.

For the relay socket, here is how the colors show:

87 - N/A

There is a bridge between the 85 and 30 pins. I guess that is where the 3 wire setup comes from.. Anyway is that setup making the draw on my system? My dad thinks its the starter, but now I am thinking this relay config has something to do with it. Please post back. Thanks

Would this work, like you had said the relay needed to be before?

87 - N/A

Jumper wire between pins 85 and 87a.

OR should it be like this:

87 - N/A

Jumper wire between pins 86 and 87a.