viper 5902 remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 remote start problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 8:52 PM / IP Logged

Finally H3/9 Should goto your yellow wire on ignition harness.

Sorry for so many sperates posts

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 9:05 PM / IP Logged

You should not need to use H3/7 since you do not have 2 ignitions

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 10:25 PM / IP Logged

tegguy wrote:

Can you list the color of the wires you tapped into?

This is what I currently have the H3 harness wired to...

h3/1 (Pink) - BLACK / YELLOW

h3/2 (RED / white) - constant 12v

h3/3 (orange) - Yellow

h3/4(violet) - BLACK/ White Car Side

h3/5 (green)- Black White Key Side

h3/6 (red)- constant 12v

h3/7 (pink/white) - BLACK / YELLOW

h3/8 (pink/black)- not used

h3/9 (RED / black)- constant 12v

h3/10 - n/a

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 10:30 PM / IP Logged

H3/3 Do not use

H3/7 Do not use

H3/9 to Yellow

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 10:32 PM / IP Logged

tegguy wrote:

Finally H3/9 Should goto your yellow wire on ignition harness.

I have H3/3 to the Yellow Accessory wire. Seems to be right since all the research so far states to wire H3/3 to Yellow and probably I'll wire H3/9 to Accessory 2 (Blue/White).

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 10:33 PM / IP Logged

I should note i'm not a professional installer but am installing a 5901 in a 92 integra with help from a professional installer and i'm going off the notes he and I put together for my car

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 10:37 PM / IP Logged

lee0092 wrote:

tegguy wrote:

Finally H3/9 Should goto your yellow wire on ignition harness.

I have H3/3 to the Yellow Accessory wire. Seems to be right since all the research so far states to wire H3/3 to Yellow and probably I'll wire H3/9 to Accessory 2 (Blue/White).

You have a blue/white? Sorry this wasn't listed on the 88 CRX wiring diagram. Blue/white is normally ignition two (at least in my car) and should goto pink/white.

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 10:39 PM / IP Logged

tegguy wrote:

H3/3 Do not use

H3/7 Do not use

H3/9 to Yellow

Thanks for the info, I'll wire that up tomorrow and see how it goes...

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 10:45 PM / IP Logged

tegguy wrote:

[QUOTE=lee0092][QUOTE=tegguy]

You have a blue/white? Sorry this wasn't listed on the 88 CRX wiring diagram. Blue/white is normally ignition two (at least in my car) and should goto pink/white.

Well from the installation I do have a blue/white, I know the crx don't have a second ignition, and as stated by the crx wiring diagram I got from best buy and websites the blue/white is the second accessory.

But here is the wiring info for 88-91 crx;

PART	COLOR	LOCATION
12 VOLT CONSTANT	WHITE/ BLACK (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/ WHITE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	BLACK / YELLOW (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	YELLOW (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	BLUE/WHITE (+)	IGNITION SWITCH HARNESS
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	RED / GREEN (+)	@ HEADLIGHT SWITCH
POWER LOCK	ADD ACTUATORS	TO BOTH DOORS, See DIAGRAM
POWER UNLOCK	ADD ACTUATORS	TO BOTH DOORS, See DIAGRAM
DOOR TRIGGER	GREEN/ RED (-)	IN DRIVERS KICK PANEL
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLUE/RED (-)	@ STEERING COLUMN HARNESS
TACH	BLUE	@ 2-PIN PLUG NEAR DISTRIBUTOR
WAIT TO START LIGHT	N/A
BRAKE	GREEN / WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 10:51 PM / IP Logged

tegguy wrote:

I should note i'm not a professional installer but am installing a 5901 in a 92 integra with help from a professional installer and i'm going off the notes he and I put together for my car

Cool... Any help and info is better then none at all. I just hope all goes well tomorrow after I rewire it... Thanks again for the info...

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.