checking speaker ohms

Yes. I during the test it was wired up to the amp by itself. Then the other one, by itself. So each speaker by itself will work. This was not installed in the box at the time. So it's not the air pressure in the box influencing the movement. They seem to sound the same too.

So everything seems ok except for the ohms reading.

I"m not sure I understand what you are saying to do.

These only have one pair of connections. A POS and a NEG. An ohms reading across the 2 connections on my left speaker reads 92 ohms.

The right speaker is 8 ohms.

The parallel wiring is outside the box. There are 4 connections. 2 for each speaker. They are wired parallel outside the box by gold or metal strip between the 2 positives and one between the 2 negatives.