the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2011 ram 2500 diesel manual transmission


Post ReplyPost New Topic
< Prev Topic Next Topic >
dieselboy_01 
Member - Posts: 13
Member spacespace
Joined: November 06, 2010
Location: Alberta, Cape Verde
Posted: November 30, 2010 at 7:22 PM / IP Logged  

Guys,

I have a Compustar CM6200S starter with a Blade AL(DL)-CH4 bypass module. And am going to install it on a Ram 2500 diesel with a moanual transmission.

Do I just hook up the starter as per the dierctions for the blade module? Or do I need to hook up some of the hardwire connections as well?

Also is the best set up or should I use the Fortin EVO-CHR module as it just plugs in?

mobiletint 
Member - Posts: 47
Member spacespace
Joined: November 07, 2009
Location: Pennsylvania, United States
Posted: December 01, 2010 at 7:29 AM / IP Logged  
I used ADS for a couple years and finally made the switch to fortin two weeks ago. Depending on what your working on the Fortin bypasses are 10x better. Id use the EVO CHR before ADS. I pulled a couple ADS pieces out and replaced with Fortin recently.
rjkboyle 
Copper - Posts: 97
Copper spacespace
Joined: August 18, 2010
Location: British Columbia, Canada
Posted: December 01, 2010 at 2:14 PM / IP Logged  
Just did a 2004 3500 Diesel with a fortin, and was great. Especially if your alarm supports the two way data link. I would say for the fortin, but either way you will have the end result.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer