prestige aps 787c, 2011 mazda 3

Home / the12volt's Install Bay / Car Security and Convenience / prestige aps 787c, 2011 mazda 3 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page Next Page > < Prev Topic Next Topic >

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 05, 2011 at 11:37 PM / IP Logged

That's what I'm actually going by..it's not correct..for instance the powerdoor lock wire is not lt green..it's white and not in the location listed..this is crazy..

Back to Top

scam404

Copper - Posts: 113

Joined: November 07, 2009

Location: Virginia, United States

Posted: January 05, 2011 at 11:52 PM / IP Logged

well then... you have a hard battle ahead then it seems.

Back to Top

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 05, 2011 at 11:54 PM / IP Logged

Yeah man ur telling me..

Back to Top

scam404

Copper - Posts: 113

Joined: November 07, 2009

Location: Virginia, United States

Posted: January 06, 2011 at 12:02 AM / IP Logged

did you try these?

https://www.the12volt.com/installbay/forum_posts.asp?tid=116276&KW=2010+mazda+3

Back to Top

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 06, 2011 at 12:08 AM / IP Logged

Yes..pretty much the same thing but less descriptive..this vehicle is def different than the 10..

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: January 06, 2011 at 2:28 AM / IP Logged

Use the dome supervision wire. It is in the driver kick panel and can also be found at the BCM in a 16 pin plug pin n. The wire color is green and is -. prestige aps 787c, 2011 mazda 3 - Page 2 -- posted image.

prestige aps 787c, 2011 mazda 3 - Page 2 -- posted image.

Gary Sather

Back to Top

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 06, 2011 at 4:22 AM / IP Logged

Gary your awesome man..thanks for the info..I ended up working my way back there and tested those wires finding them a little before you posted..wish I woulda saw your post sooner..appreciate the help!!

Back to Top

scam404

Copper - Posts: 113

Joined: November 07, 2009

Location: Virginia, United States

Posted: January 06, 2011 at 9:05 AM / IP Logged

so does that mean that bully dog's diagram is correct? Are you using a pinout diagram of the BCM connectors from the service manual? If not i would recommend downloading it.

Back to Top

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 06, 2011 at 11:42 AM / IP Logged

Bulldogs website is correct in the color an location for some..

Back to Top

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: January 06, 2011 at 11:46 AM / IP Logged

Having an issue with this one wire door lock system. Lock is working thru the 1k resistor I'm using via the neg lock positive unlock wire..but I'm not getting unlock ??

Back to Top

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.