wire two 4ohm dvc subs to amp

Home / the12volt's Install Bay / Car Audio / wire two 4ohm dvc subs to amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: April 02, 2011 at 11:48 PM / IP Logged

So I have two 12" Kicker CVRs that are 4ohm DVC @ 800rms (total)

I also bought a Kenwood KAC-9105D 1800watt mono that does 900rms @ 2ohms. But I was told that i cant wire it to 2ohm, only 4ohm or 1ohm.

In the specs on the Amp it says "stable 1ohm - Yes" does that mean I can wire my subs to 1ohm load and wire to the amp just fine?

I cant seem to find an answer to this problem.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 03, 2011 at 9:19 PM / IP Logged

Yes that amp is rated as 1-ohm stable. Make very sure you set your gain properly.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wire two 4ohm dvc subs to amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.