nitro bmwx 433 alarm/starter on 99 legacy

Keep looking.  You're almost finished.  It's there somewhere.  (DMM testing procedure previously posted.)The three references all show the (-) Door Trigger as RED / White.  Connect to Green (-) Door Triogger Input of alarm. All Door Trigger        RED / WHITE  (-)                 ABOVE BRAKE PEDAL KEYLESS ENTRY MODULE                 Audiovox Door Trigger              RED / white   -                        blk plug above hood release                                                          DEI DOOR TRIGGER      RED / WHITE (-)                 @ BLACK PLUG, ABOVE HOOD RELEASE                                 BulldogSoldering is fun!

You will need two 1N4001 ( 1N4004, 1N4007 ) diodes if you wish to combine the Door and Trunk Triggers on to the alarms' one (-) Trigger Input wire.  Diode band away from the alarm, towards the car.  Diode info :  https://www.the12volt.com/diodes/diodes.asp

Soldering is fun!

found the wire . What confused me is it had grey dots on it. but it took care of everything, the trunk too. I thank you so much for your time and help. Ill be sure to pay it forward. Im very grateful. It works great.SimmpleeDaBesst

Congratulations and well done!    The first one is always the most difficult.Soldering is fun!

by the way i see you live in NY too. Perhaps near me. I live in Wappingers Falls which is near Poughkeepsie. Are you an installer or electrician perhaps. I would like too take you out for a beer sometime. My Girlfriend and I live together. She works at Hertz and I work at Perretta Graphics in Poughkeepsie. Thanks again. My E-mail is ShawnWiosna@Gmail.com. Drop me your info like phone # and ill invite you to a place I know, run by Irish, Great food too!SimmpleeDaBesst