the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer

factory kicker box polyfill

Post ReplyPost New Topic

< Prev Topic Next Topic >
denley 
Member - Posts: 4
Member
Joined: April 10, 2009
Location: Tennessee, United States
Posted: June 30, 2011 at 4:50 PM / IP Logged Link to Post Post Reply Quote denley
ok i got a factory kicker box, it is the dual 12 cvr combo ported. i have 2 12" RE audio SR series to put in there. They are almost the exact same specs as the cvr so i dont see a problem there, but the kicker box comes factory with polyfill in it. Should i remove the poly fill for the RE's or leave it? Also it just didnt seem to sound too good with the polyfill in is why im asking. Thanks

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
  •  
Search the12volt.com
Custom Search
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, January 24, 2017 • Copyright © 1999-2017 the12volt.com Donate to the12volt.com Advertising Top of Page
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com - Free Installation Information for Mobile Electronics Installers, Enthusiasts, and Do-It-Yourselfers since 1999
Top
the12volt.com spacer
the12volt.com spacer