box design

Home / the12volt's Install Bay / Car Audio / box design (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pumpkinman

Member - Posts: 7

Joined: March 19, 2009

Location: New York, United States

Posted: July 27, 2011 at 12:53 PM / IP Logged

Hello all..Im looking for help on building an enclosure for 4 orion hccas.. i dont have much room in my car but it can be done..im not good at box designing.its in a 1998 chevy cavalier.If anyone could help me design a box it would be very much appreciated.. i get lost in the math..anyone willing to help please contact me thank you very much.

jl-audio13w7 2 12.2 orion hccas.. massive p1500.1 amp.. american base amp 400.1 spl.. crunch 3000 pro amp..2 jl-audio 15w4d4s subs

jpeterman15

Member - Posts: 15

Joined: July 24, 2011

Location: Indiana, United States

Posted: July 30, 2011 at 5:55 AM / IP Logged

try this.....http://www.directeddealers.com/manuals/OG/Orion/GHCCA102%202008-11MLweb2.pdf

jpeterman15

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 30, 2011 at 2:28 PM / IP Logged

The two most important considerations in automotive enclosure design is 1) making it fit the vehicle and 2) making it the correct size for your drivers. Often 1) is more critical since drivers can be swapped out if you find you must use a size different from what your first choice might require. So I recommend measuring your available space first and figure out what you CAN put into your vehicle, then if the woofers you have don't work well in that space find some that will.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box design

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.