coils/capacitors for crossovers?

Home / the12volt's Install Bay / Car Audio / coils/capacitors for crossovers? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 28, 2011 at 8:13 AM / IP Logged

So which frequency should we use to figure the values? 100Hz or 350Hz?

My logic tells me that same values in both places = high and low pass of the same frequency. But that's just my logic.

This calculator has the components in a slightly different configuration. This may have been the basis for my logic. It has been many years since I have used any of this type of a crossover.

http://archive.pac-audio.com/crossover/crossoverbp.asp

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: September 28, 2011 at 9:01 AM / IP Logged

The coil values are the same and the cap values are the same in that filter. You will use whichever band of frequencies you want to pass. The coils are low pass filters at the upper end of the band of frequencies you choose. The caps are high pass filters at the lowered end of that band.

coils/capacitors for crossovers? - Page 2 -- posted image.

the12volt • Support the12volt.com

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

coils/capacitors for crossovers?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.