adding door lock actuators to 96 integra

Home / the12volt's Install Bay / Car Security and Convenience / adding door lock actuators to 96 integra (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

shadow818

Member - Posts: 26

Joined: November 09, 2010

Location: California, United States

Posted: December 20, 2011 at 9:08 PM / IP Logged

Howie can't I just use a lock spal illuminated switch to provide neg pulse to lock unlock?

howie ll wrote:

Scratch my last answer ref: the switch.

Centre pin, 12v+ constant fused at 15amps.

Next green lock motor wire from R/S then green to solenoids from outer.

Other side, blue or unlock motor wire from R/S, outer blue to solenoids.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 20, 2011 at 11:01 PM / IP Logged

No. You are using the motor wires from the alarm. Adding negatives won't work you would need two more relays. Simply feeding pos will blow a fuse every time you use the switch.

If SPAL does a switch marked lock with the 5 pin configuration then it's wired as I explained.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding door lock actuators to 96 integra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.