2005 honda pilot viper responder one

Hi ill be installing Viper responder one on 05 pilot with Tbxkey I have a question with disarm and rearm factory alarm . Do i need to use relay as sown on installation manual of responder one ? Or is it only for delayed pulse??? thanks a lot ! H1/1 LIGHT GREEN/ BLACK FACTORY ALARM DISARM This wire sends a negative pulse every time the remote start is activated or the doors are unlocked. This can be used to pulse the disarm wire of the vehicle’s factory anti-theft device. Use a relay to send a (-) or (+) pulse to the disarm wire as shown in the following diagram H1/2 GREEN / WHITE FACTORY REARM This wire sends a negative pulse every time the remote start shuts down or the doors are locked. This can be used to pulse the arm wire of the vehicle’s factory anti-theft device. Use a relay to send a (-) or (+) pulse to the arm wire.

and should i go with PKALL instead of tbxkey ?

Unless you don't mind losing a working key under the dash, go with the PKALL ( or even a PHK34 or PKH3, slightly less expensive ).Soldering is fun!

no relay needed, a fortin honda sl3 will also take care of bypass without loosing a keyTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

all done , works perfect for couple of weeks ! used pkall found for 18 $ :) thxz