09 denali hatch release and liftgate

Home / the12volt's Install Bay / Car Security and Convenience / 09 denali hatch release and liftgate (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jonyb

Copper - Posts: 60

Joined: December 04, 2004

Location: Kentucky, United States

Posted: December 25, 2011 at 9:06 PM / IP Logged

2009 Yukon Denali with power liftgate and separate hatch release

Clifford 50.7X

ADS-ALSL-GM

Wire to wire

I tied the RED / white (trunk release from the Clifford) to the RED / white (on ADS)

also connected the aux 2 from Clifford to the brown "tailgate window release".

When I activate auxiliary 1, both the liftgate goes up, and the hatch opens.

What gives?

Everything else works like a charm.

John Bauer

Pro Installz

Paducah, KY

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 26, 2011 at 4:35 AM / IP Logged

AUdiovox says Pink Or Grey. DId you possibly read that as Pink and Grey?

Note reads: PINK IS GLASS RELEASE, GRAY IS HATCH RELEASE

Back to Top

jonyb

Copper - Posts: 60

Joined: December 04, 2004

Location: Kentucky, United States

Posted: December 26, 2011 at 6:01 AM / IP Logged

Nevermind, I just realized that there are 2 wires for auxiliary 1 on the 50.7X.

John Bauer

Pro Installz

Paducah, KY

Back to Top

jonyb

Copper - Posts: 60

Joined: December 04, 2004

Location: Kentucky, United States

Posted: January 02, 2012 at 10:42 PM / IP Logged

went back today and tried to fix it. I thought I had both aux 1 wires connected to powerliftgate and hatch, but now there is only one wire connected, and the problem is still there.

2009 Yukon Denali

Clifford 5702X

AL-SLGM

Hardwired

RED / white (aux 1) from Clifford to RED / white (power liftgate) on ADS

Having a problem when I press the aux 1 function, the power liftgate and hatch both open at the same time. I originally had WHITE/ violet (Clifford) to Brown (ADS), but realized that the WHITE/ violet was a negative trigger for relays on aux 1. I went back and clipped that wire, and the problem is still there.

Any thoughts or suggestions?

John Bauer

Pro Installz

Paducah, KY

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

09 denali hatch release and liftgate

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.