530t with resistor mod still wont work

Home / the12volt's Install Bay / Car Security and Convenience / 530t with resistor mod still wont work (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 05, 2012 at 4:15 PM / IP Logged

Actually I didn't think it through, use a timed aux out for 2 seconds longer than window up link it to on when armed or not, up to you.

Then use as shown above to control the upside, relays being far cheaper than timers, your R/s becomes the timer. Still a kludge though.

ckk650

Member - Posts: 4

Joined: November 10, 2011

Location: California, United States

Posted: January 05, 2012 at 6:44 PM / IP Logged

howie ll wrote:

Actually I didn't think it through, use a timed aux out for 2 seconds longer than window up link it to on when armed or not, up to you.

Then use as shown above to control the upside, relays being far cheaper than timers, your R/s becomes the timer. Still a kludge though.

Thanks! I was thinking the same thing -- buy a bunch of relays, sell the 530's on ebay, and drive diote protected voltage straight onto the switch wires using the timed alarm outputs. Totally a kludge, and it loses both the one-touch and the safety features of the 530. I wish I could find a real (full) circuit diagram for the 530 so that I could properly modify it to deal with this situation.

For now, I will wire power/ground and the trigger wires to my install location, and spend some time working on the window motors when I have finished installing the rest of the stereo and alarm parts.

Either way, thanks everyone for the advice!

--Carey

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

530t with resistor mod still wont work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.