the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

brightness, which led?


Post ReplyPost New Topic
< Prev Topic Next Topic >
astra1397 
Member - Posts: 7
Member spacespace
Joined: July 04, 2011
Posted: March 03, 2012 at 2:30 AM / IP Logged  
I wanted to give you all an update on this.
I decided to use these LED's and I am happy with the results It converts out to 9.92 lumens per LED so I used two to get 19.84 lumens in each door. I was aiming for about 25 lumens but this is plenty bright enough. And at only $2.50 each I think I did well. Thanks for your advice on this project.
4 pin high brightenss LED
This is a pic of the completed install:
door lights
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, June 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer