DEI relay question

Home / the12volt's Install Bay / Car Security and Convenience / DEI relay question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ksachet

Member - Posts: 13

Joined: April 08, 2003

Location: United States

Posted: May 01, 2003 at 2:36 PM / IP Logged

Can someone help me figure out where the Domelight supervison wire is and how to hookup this relay. I have found the (+) 12v white wire, which I believe is to be the domelight supervison polarity wire (+) input but where is the Domelight supervison wire? Do you tie these wires together? Are they the same wire? if not where is the domelight supervision wire ? I have looked at several schematics , nothing listing a supervison wire and a (+) polarity supervison wire. I have a 98 pontiac sunfire. with a DEI python 460hP alarm. Help is greatly appreciated!

DEI relay question - Last Post -- posted image.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: May 01, 2003 at 5:16 PM / IP Logged

Ok here is what you need to do. First find the drivers side door trigger, it should be GREEN/ black in the dside kick panel. Then wire a relay: 85 12V+, 86 BLACK/ white supervision output, 30 ground, 87 output to door trigger. It is important that you use the actual door trigger and not the wire going to the light.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI relay question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.