led bezel, reducer, or clip

Home / the12volt's Install Bay / Car Security and Convenience / led bezel, reducer, or clip (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scout238

Member - Posts: 25

Joined: February 16, 2005

Posted: February 06, 2012 at 11:45 PM / IP Logged

Hi guys

I replaced my old car alarm with a new one and the LED hole from the first alarm is too big for the new alarm's LED.

I need some kind of clip/bezel/reducer to either reduce the hole down to fit the smaller led or a large bezel to cover the hole but still work with the smaller LED. I think the hole was for a 5mm and new one is a 3mm.

Any ideas?

Thanks!

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 07, 2012 at 6:19 AM / IP Logged

Grommet, or try Radio Shack for LED holders.

Or retain the original LED or buy another 5mm that matches (voltage and current) with your new one.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led bezel, reducer, or clip

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.