2009 toyota camry and python 574

Home / the12volt's Install Bay / Car Security and Convenience / 2009 toyota camry and python 574 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vietxtlife

Member - Posts: 10

Joined: November 27, 2011

Location: North Carolina, United States

Posted: February 27, 2012 at 11:17 AM / IP Logged

My 2.4l camry doesnt have factory keyless entry, do i need any bypass to install remote starter. This is my first time installing alarm and starter, any helps will be appreciated.

kreg357

Platinum - Posts: 7,789

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 27, 2012 at 1:11 PM / IP Logged

Probably does but do a test or check to be sure.

Look at the ignition key. Does it have a "G" stamped on the blade near the key-head?

Wrap the key head with several layers ( 4 or 5 ) of aluminum foil. Try to start car.

Open up the steering column ( remove lower cover ) and check for antenna ring at end of ignition cylinder / transponder plug.

Soldering is fun!

vietxtlife

Member - Posts: 10

Joined: November 27, 2011

Location: North Carolina, United States

Posted: February 27, 2012 at 2:58 PM / IP Logged

if i needed one which will be best to work with? Also i will add some other sensor like tilt sensor, audio sensor and back up battery could some one shine some light on how to wire them up conjunction with shock sensor.

kreg357

Platinum - Posts: 7,789

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 27, 2012 at 5:49 PM / IP Logged

The DEI PKALL or Fortin Key-Override-All is a good choice as the bypass module.

Soldering is fun!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 27, 2012 at 7:02 PM / IP Logged

you will definitely need a bypass module. The two Kreg suggested will be perfect for your application. forget adding any sensors, the only thing i would consider is the backup battery.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: February 27, 2012 at 9:28 PM / IP Logged

The tilt sensor is a great choice to have the alarm sound if it gets towed. The 507D works great. Your key has a dot on the blade and is 40bit, all 2009 Camrys are. Flashlogic FLTB1 on Amazon for 35 bucks. The car has two starter wires so you will need a relay to address this. DO NOT tie them together...

Mike M2

Tech Manager

CS Dealer Services

vietxtlife

Member - Posts: 10

Joined: November 27, 2011

Location: North Carolina, United States

Posted: February 28, 2012 at 11:35 AM / IP Logged

thank you all for all the helps, just order an key-override-all from amazon. hopefully the installation goes smooth, will update later.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2009 toyota camry and python 574

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.