which 4 channel amp?

Home / the12volt's Install Bay / Car Audio / which 4 channel amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

deeryders

Copper - Posts: 97

Joined: November 08, 2011

Location: New York, United States

Posted: June 22, 2012 at 12:50 PM / IP Logged

I have 6 Whip Audio 6.5 speakers which are 100 watts RMS along with 2 soundstream TWS.4 tweeters. The amp I have not is a logic DBx1004. It plays very very well. Except the impendance is to high for the amp therefore it over heats from time to time. Someone had suggested a Rockford T600-4. You think it is worth it or should I just put fans underneath what I have. Also, what is the difference here:

http://ceramic.audiogoshop.com/rockford-fosgate-power-t6004-600-watt-multi-channel-amplifier-electronics_p6629.html?offer_id=B000NJFUWG

http://www.crutchfield.com/p_575T6004P/Rockford-Fosgate-Power-T600-4-Standard.html

MECP Certified

Dont Ground Out!!!

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 22, 2012 at 3:58 PM / IP Logged

If properly connected, that amp should run all of those speakers without any problems. How many speakers do you have connected to each channel of the amp?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

which 4 channel amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.