viper 5704 alarm 1st alarm attempt

Home / the12volt's Install Bay / Car Security and Convenience / viper 5704 alarm 1st alarm attempt (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 22, 2012 at 10:05 AM / IP Logged

Still adjust, can't do any harm.

Back to Top

wiseman118

Member - Posts: 37

Joined: June 21, 2012

Location: Texas, United States

Posted: July 22, 2012 at 10:35 AM / IP Logged

Howie,

Another bad penny question.... With The latest wiring diagram that you gave me (dome light supervision), I just want be sure that I reading it right when i hook up the grounds to the switch.

There are 2 wires on my door switch. One that is a continuous ground and the other that switches to ground when the door is opened (or closed , I can't remember which one). So, does the door trigger wire (h2/6) splice into the wire that switches to ground? And pin 30 from the relay attaches to the constant ground, correct?

This how an interpreting your diagram, once again... Sorry for the beginner question again.

Wiseman118

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 22, 2012 at 10:47 AM / IP Logged

Correct, the one that switches to ground.

Back to Top

wiseman118

Member - Posts: 37

Joined: June 21, 2012

Location: Texas, United States

Posted: July 22, 2012 at 11:05 AM / IP Logged

Ok thanks.....and will try the autostart adjustment and let you know, thanks

Wiseman118

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5704 alarm 1st alarm attempt

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.