OK here's an update,
I went with the iDatalink ADS-AL-CA module and installed everything in "Data Mode". I have run into a couple issues. After I programmed the module (i have the ADS-USAB cable and an account on their site) the alarm and keyless entry worked (doors would lock and unlock) via remote. When you try to engage the remote start, the screen on the remote says "Feature Not Available". I checked my connections and tried to re-set and re-program the module, which I did successfully. Now the alarm still works via remote however now the keyless entry does not work and the remote start still does not engage, with the remote displaying "Feature Not Available". I'm a little confused so I figured I post up before I go any further. Any ideas? Thank you!
Here are my connections
Main Harness, 6 Pin Connector
Harness/ Pin: Harness Wire Color: Connection: Vehicle Wire Color
H1/1: Red: (+) 12VDC Constant Input: Red at BCM
H1/2: Black:(-) Chassis Ground: Ground
H1/3: Brown: (+) Siren Output: Red wire on Siren
H1/4: WHITE/ Brown: Parking Light Isolation Wire: Not Used
H1/5: White: Parking Light Output: Yellow/ Blue, BROWN / Yellow with diodes POS 1&26, 42 Pin @BCM
H1/6: Orange: (-) 500mA Ground when armed output: Not Used
Auxiliary/ Shutdown/ Trigger Harness, 24 pin
Harness/ Pin: Harness Wire Color: Connection: Vehicle Wire Color
H2/1: Pink/ White: (-) 200mA Ignition/ Flex Relay Control Output: Not Used
H2/2: BLACK/ White: (-) Neutral Safety Input: Ground
H2/3: Blue/ White: (-) 200mA 2nd Status/ Rear Defogger Output: Not Used
H2/4: GREEN/ Black: (-) 200mA OEM Alarm Disarm Output: Not Used
H2/5: RED / White: (-) 200mA Trunk Release Output: Brown POS 11, 60 PIN @BCM
H2/6: Green: (-) Door Trigger Input (N/C or N/O): Not Used
H2/7: BLACK/ Yellow: (-) 200mA Dome Light Supervision Output: Not Used
H2/8: BROWN / Black: (-) 200mA Horn Honk Output: Not Used
H2/9: Dark Blue: (-) 200mA Status Output: Not Used
H2/10: Pink: (-) 200mA Ignition 1 Output: BROWN / Yellow POS 43, 60 PIN @BCM
H2/11: WHITE/ Black: (-) 200mA Aux 3 Output: Not Used
H2/12: Violet: (+) Door Trigger Input: Not Used
H2/13: WHITE/ Violet: (-) 200mA Aux 1 Output: Not Used
H2/14: Violet/ Black: (-) 200mA Aux 2 Output: Not Used
H2/15: ORANGE / Black: (-) 200mA Aux 4 Output: Not Used
H2/16: Brown: (+) Brake Shutdown Input: GREEN/ Red POS 16, 42 PIN @BCM
H2/17: Grey: (-) Hood Pin Input (N/C or N/O): Not Used
H2/18: Violet/ Yellow: (-) 200mA Starter Output: Not Used
H2/19: Blue: (-) Trunk Pin/ Instant Trigger Input (N/C or N/O): Not Used
H2/20: Grey/ Black: (-) Diesel Wait to Start Input: Not Used
H2/21: WHITE/ Blue: (-) Remote Start/ Turbo Timer Activation Input: Not Used
H2/22: Orange: (-) 200mA Accessory Output: Not Used
H2/23: Violet/ White: Tachometer Input: Not Used
H2/24: GREEN/ White: (-) 200mA OEM Alarm Arm Output: Not Used
Door Lock, 3 pin connector (5 Pin Relay Required)
Harness/ Pin Harness Wire Color Connection Vehicle Wire Color
1: Blue: (-) 500mA Unlock Output: Not Used
2: Empty: Not Used
3: Green: (-) 500 mA Lock Output: Not Used
Remote Start, 10 pin heavy gauge connector
Harness/ Pin Harness Wire Color Connection Vehicle Wire Color
H3/1: Pink: (+) Ignition 1 Input/ Output: BROWN / Yellow POS 43, 60 PIN @BCM
H3/2: RED / White: (+) Fused (30A) Ignition 2/ Flex Relay Input 87: Not Used
H3/3: Orange: (+) Accessory Output: Violet/ Green POS 44, 60 PIN @BCM
H3/4: Violet: (+) Starter Output (Car Side of Starter Kill): Blue/ White POS 04, 27 PIN to right of BCM
H3/5: Green: (+) Starter Input (Key Side of Starter Kill): Not Used
H3/6: Red: (+) Fused (30A) Ignition 1 Input: Yellow 12V @ BCM
H3/7: Pink/ White: (+) Ignition 2/ Flex Relay Output: Not Used
H3/8: Pink/ Black: (+) Flex Relay Input 87A key side (if required) of Flex Relay: Not Used
H3/9: RED / Black: (+) Fused (30A) Accessory/ Starter Input: Red 12V @ BCM
H3/10: NC: No Connection: None
iDatalink ADS-AL CA Module
WHITE/ Black: Driver Door Pin: GREEN/ Violet POS 45, 60 PIN @ BCM (Module side)
WHITE/ Red: Driver Door Pin: GREEN/ Violet POS 45, 60 PIN @ BCM (Car side)
BROWN / Red: CANH: Gray/ Orange POS 41, 42 PIN @BCM
BROWN / Yellow: CANL: Violet Orange POS 40, 42 PIN @ BCM
ORANGE / Black: RX: Violet/ Gray POS 40, 42 PIN @ BCM
ORANGE / White: Lock/ Unlock (-) Output: Brown POS 11, 60 PIN @ BCM
Orange: Keysense (+): Blue/ Gray POS 46, 60 PIN @ BCM
Pink: Ignition (+) Input: BROWN / Yellow POS 43, 60 PIN @BCM
Gray/ Red: TX: Yellow/ Orange POS 54, 60 PIN @ BCM
Thanks again!
Adrian
ag