viper 5902 + dball in hyundai 2012

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 + dball in hyundai 2012 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 23, 2013 at 7:35 AM / IP Logged

No, it's all low current.

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: February 23, 2013 at 9:41 AM / IP Logged

As far as I know, there are no diodes needed.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 23, 2013 at 9:50 AM / IP Logged

You have 2 reds, a RED / black, and a RED / white. Power (connect) them all to a constant source but you should only need about 15 amps for ALL because you are switching data through the DB-ALL rather than power.

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: February 23, 2013 at 6:06 PM / IP Logged

I want to check this point is

Black Harn. Pin 1 Green --> 5902 CPU Door Lock Harn. Pin 3 Green (-) 500mA Lock Output

Black Harn. Pin 2 Blue --> 5902 CPU Door Lock Harn. Pin 1 Blue (-) 500mA Unlock Output

Those two are right?

As for your previous post about

Black Pin 4 WHITE/ violet --> 5902 H2/6 aux1

Black Pin 10 Blue/white --> 5902 H2/10 dark blue

Do I need to program anything in my Viper 5902 for those two connections

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 23, 2013 at 11:52 PM / IP Logged

Correct and no.

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: February 24, 2013 at 12:15 AM / IP Logged

What you mean by correct and no, pls explain

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 24, 2013 at 1:00 AM / IP Logged

Black Harn. Pin 1 Green --> 5902 CPU Door Lock Harn. Pin 3 Green (-) 500mA Lock Output

Black Harn. Pin 2 Blue --> 5902 CPU Door Lock Harn. Pin 1 Blue (-) 500mA Unlock Output

Those two are right?

Black Pin 4 WHITE/ violet --> 5902 H2/6 aux1

Black Pin 10 Blue/white --> 5902 H2/10 dark blue

Above statements are correct.

Do I need to program anything in my Viper 5902 for those two connections

NO.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 24, 2013 at 1:02 AM / IP Logged

Wire exactly as the first diagram you posted.

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: February 24, 2013 at 2:13 AM / IP Logged

You mean i should remove all the dashed connection again ?

Howard it is now very confusing could you please make it more easier for me

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 24, 2013 at 2:34 AM / IP Logged

No, use the dashed connections.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.