2011 camry le, fog light kit

Hi I've just got done wiring up most of my fog kit and need one more thing. Here's what I have so far: Ground from fog connectors to a common ground on chassis. Fused power cable from relay connected to battery(?) Ground from switch connected to common ground point in cabin Now all i need to do is connect the power cable coming from the switch. Do i plug this into a fuse box? Add-A-line or something? I have a 15A fuse for front fogs in my fuse box but I've never had fogs and i see no prewiring for them. would this work? Also there are some fuses labeled "no circuit" and one with a slash down the middle that doesn't have a fuse in it. Does this mean that this doesn't connect to the power source? if it does, Could i use one of these as well? Thanks

had a sunlight fuse i wasn't using. Used that.

Use the same fuse as the relay though that assumes the switch wire rating matches or exceeds the fuse size. Else pick any other (small?) fuse - on a IGN +12V circuit if that's what you want. You could also bridge the +12V input to the relay (30 or 87) to the coil+ (86) and then run coil- (85) to the switch whose other side is grounded (assuming it is not a lit switch).

well, I just ran the switch wire back through the firewall and connected the add-a-circuit to one of my drl headlights. Now it works with those. Thanks for the advice.