2 way switch?

Home / the12volt's Install Bay / Car Audio / 2 way switch? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

deeryders

Copper - Posts: 97

Joined: November 08, 2011

Location: New York, United States

Posted: August 15, 2013 at 11:33 AM / IP Logged

I did a 2013 Jeep Wrangler with a 5 channel amp replacing his factory sub. He wants antoher sub in the box for better bass but has a switch so when he needs the trunk space he can switch back to the factory sub. What kind of switch can I use for 300 watts of power going to the sub from the 5 channel? Which kind fo switch can I use? Thanks again guys.

MECP Certified

Dont Ground Out!!!

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 15, 2013 at 6:16 PM / IP Logged

You need a Double Pole Double Throw On-On switch rated at 10 amps.

With the switch connections facing you, wire the amp positive wire to the Middle terminal of the left row. Connect the amp Negative wire to the center connection of the Right row. Connect the factory woofer to the 2 top connections. Connect the Box to the 2 bottom connections.

Positive wires all on the left row and negative wires all on the right.

Back to Top

deeryders

Copper - Posts: 97

Joined: November 08, 2011

Location: New York, United States

Posted: August 15, 2013 at 10:16 PM / IP Logged

Okay. So I can obviously go with persay something that is of a higher amperage and I cant use 120V ones because they are used for homes. Right? I know dumb questions, but I want to make sure.

MECP Certified

Dont Ground Out!!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 way switch?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.