I'm about to tackle the Viper 5704V install (my first R/S) on my 1998 Toyota Tacoma (3.4L extended cab manual transmission) and I've definitely learned a great deal from this site. I've listed out the main harnesses and do what color wire's I'll be connecting them just to have someone double check my work. I only have a few really uncertain connections and they are listed in bold. Hopefully I'm on the right track and will have a relatively easy install!
I don't think that I need to isolate the door wires with diodes seeing as there are only 2 doors and the truck doesn't distinguish which is open. I'm also assuming that since the cut sheet for the harnesses requires both Door Input - and + to be hooked up for a manual transmission, that I'd just connect the + to the + door trigger wire.
The real question revolves around the H2/18, H2/9 and H2/10 wires. Slightly confused as to where I'd hook up a relay back to the truck for H2/18?
I really appreciate anyone checking this over for me!
H1
H1/1_______Red__________12DC Constant Input_________White 12v constant
H1/2_______Black________Chassis Ground______________Ground
H1/3_______Brown________Siren Output________________Siren +
H1/4_______WHITE/ Brown__Parking Light Isolation_____N/A
H1/5_______White________Parking Light Output________Green (Bottom fuse box white plug)
H1/6_______Orange_______Ground When Armed Output____N/A
Door
D1/1_______Blue_________Unlock Output_______________RED / Yellow
D1/2_______N/A
D1/3_______Green________Lock Output_________________RED / White 12 pin conn dr kick
H2
H2/1_______Pink/White____Ignition 2/Flex Output______N/A
H2/2_______BLACK/ White___Neutral Safety______________Parking Break
H2/3_______Blue/White____2nd Status/Rear Defog_______N/A
H2/4_______GREEN/ Black___Factory Alarm Disarm________N/A
H2/5_______RED / White_____Trunk Release_______________N/A
H2/6_______Green_________Door Input (-)______________Door (-) w/o Diode?
H2/7_______BLACK / YELLOW__Dome Light Output__________N/A Needed?
H2/8_______BROWN / Black___Horn Honk__________________GREEN/ Red
H2/9_______Dark Blue_____Status Output______________ ?
H2/10______Pink__________Ignition 1 Output__________ ?
H2/11______WHITE/ Black___Aux 3______________________N/A
H2/12______Violet________Door Input (+)_____________Door (+) ..diode?
H2/13______WHITE/ Violet__Aux 1______________________N/A
H2/14______Violet________Aux 2______________________N/A
H2/15______ORANGE / Black__Aux 4______________________N/A
H2/16______Brown_________Brake Shutdown_____________GREEN / WHITE by pedal
H2/17______Gray__________Hood Pin___________________Hood Pin
H2/18______Violet / YELLOW_Starter Output_____________Use a relay...but connect to truck where?
H2/19______Blue__________Trunk Pin__________________N/A
H2/20______Gray/Black____Diesel Wait________________N/A
H2/21______WHITE/ Blue____Activation Input___________?
H2/22______Orange________Accessory Output___________N/A (whats it for?)
H2/23______Violet/White__Tach Input_________________Black by ODB or engine bay
H2/24______GREEN / WHITE___Factory Alarm Arm Out______N/A
H3
H3/1_______Pink__________Ignition 1 Input/Output_____________BLACK / YELLOW
H3/2_______RED / White_____Ignition 2 / Flex Relay Input 87____White (12v constant)
H3/3_______Orange________Accessory Output____________________Blue/Red
H3/4_______Violet________Starter Output (car side)___________Black - split (car side)
H3/5_______Green_________Starter Input (key side)____________Black - split (key side)
H3/6_______Red___________Ignition 1 Input____________________WHITE/ Red
H3/7_______Pink/White____Ignition 2 / Flex Relay Output______BLACK/ Red
H3/8_______Pink/Black____Flex Relay Input 87A key side_______N/A
H3/9_______RED / Black_____Accessory/Starter Input_____________White (12v constant)
H3/10______N/A